Rocket Science

My partner loves meteorites, so I decided to surprise them last Christmas with a few pallasites. Pallasite meteorites have nickle-iron matri...

Haven't had time to work much on my rocket. The bigger problem is the space. My small apartment doesn't have much room for hobbies :...

I managed to get some work done on my L3 rocket today. The centering rings' ODs were about 1/32" too large. I used a dremel and a...

I plugged it in and measured voltages across some of the components using a super cheap volt meter. With black tape on the photoresistor (LE...

This process has been such a pain in the ass, so hopefully this will save you some stress. The HP Split has two hard drives. A small SSD (...

I haven't done much fabrication. I installed the AeroPack 98mm retainer on the rear centering ring. This was kind of a pain in the ass. ...

I got around to sanding the fins. I started by marking a line for the ~10 degree bevel on both sides and a line down the center of the edges...